Skip to content

Engineer by training. Carpenter by trade.

Iago Guedes, founder of Nexus Build Works
Iago GuedesFounder, Nexus Build WorksLadson, SC

Family owned, based in Ladson. The person who measures and quotes your project is the person who builds it.

The story

Iago Guedes earned a degree in mechanical engineering. Then he spent the last seven years where he wanted to be: on job sites, with a framing square in his hand.

He started Nexus Build Works as a family company with one rule: treat every project like it is our own home. The engineering shows up in things you notice later. Walls that are square, cabinets that sit level, numbers that were checked before the cut.

Iago is on your job, not behind a desk. The person who measures and quotes your project is the person you talk to while it is built.

The short version

Three facts about who runs your job. Nothing on this sheet is rounded up.
Training
Mechanical engineer
Loads, slopes and clearances get worked out before the cut, not on the fly.
Trade
7 years in carpentry
Framing, trim and finish work, done by hand on job sites.
Company
Family owned
The owner is on your job, not just on the sign.

Who we build for

Nexus Build Works does the labor. You choose and buy the materials, with no markup from us, and we tell you what to order and when.
  • Homeowners

    The kitchen or bathroom you use every day, or the list of repairs you have been putting off.

  • Families

    More room as the family grows: an addition, a second bathroom, a layout that works for everyone.

  • Investors

    Rentals and resale houses that need the work done right, written down and easy to check.

  • People building from the ground up

    A lot and a set of plans. We do the layout, framing, roof, dry-in and finish carpentry.

What an engineer's eye changes

It is not special equipment. It is the habit of checking the number before the cut. Four places where that shows up in a house.
1/4 in per ft

Shower floors fall to the drain

The residential code calls for a shower floor to slope at least 1/4 inch per foot toward the drain. With the drain 2 feet from the wall, that is half an inch of fall. We check the slope before the waterproofing goes on, because after the tile it cannot be fixed.

3 : 4 : 5

Square is a number, not a guess

Before cabinets or tile, we check the corners with the 3-4-5 rule. Mark 3 feet along one wall and 4 feet along the other. The diagonal between the marks should read exactly 5 feet. If it does not, we know before the first cabinet goes in and plan the layout around it.

1/8 in

Cabinets set for the countertop

Stone fabricators commonly ask for base cabinets level within 1/8 inch across the run before they template. We find the high point of the floor, set the first cabinet there and shim the rest up to it. Miss it and the gap shows at the backsplash.

3/8 in

Stairs that feel even

The code allows a riser up to 7 3/4 inches, and the tallest and shortest riser in a flight can differ by no more than 3/8 inch. Your feet notice less than that. We divide the total rise by the number of steps before we cut a stringer, so every step comes out the same.

Electrical work, under our own license

Nexus is licensed for electrical work in South Carolina and does the electrical on its own jobs: the circuits, outlets, switches and lighting a kitchen, bathroom or addition needs. The wiring is planned with the layout, while the walls are open.

Look us up

Nexus Build Works has a public contractor profile on BuildZoom. You can also find us on Facebook and Instagram.

Tell us about the room.

Tell us what you are planning and where the house is. Iago will come out, measure, and send a written quote for the labor. It is free, and there is no obligation.

Get a free written quote